SPEEDYFIL

Manipulator s duplim kablom

Pneumatski manipulator Speedifil SP sa dvostrukim kablom opremljenim jednostavnim alatima za hvatanje, omogućava rukovanje laganim teretima u bestežinskom stanju, širom radnog prostora. Alat za hvatanje povezan je sa balansnom grupom pomoću dva nezavisna čelična kabla kako bi se zagarantirala maksimalna sigurnost.

Maksimalna težina tereta 50-80 kg
Maximalan opseg rada 2000 mm
Maksimalna okomita brzina podizanja 0,5 metara/sekundi
Vertikalno dizanje 1650 mm – 2150 mm
Sistem upravljanja isključivo pneumatski
Napajanje filtrirani komprimirani zrak (40 µm), bez podmazivanja
Radni pritisak 0.7 ÷ 0.8 Mpa
Radna temperatura od +0° do +45° C
Razina buke <70 dB
Potrošnja od 3 Nl ÷ 10 Nl po radnom ciklusu
Rotacije – konstantna rotacija od 360 ° na stupu i osi alata
- 315 ° rotacija na srednjoj osi

 

Pneumatic Manipulator Speedyfil SP with double cable equipped with simple gripping tools, allows the handling of light loads in a weightless condition, throughout the working area. The gripping tool is connected to the balancing group by two independent steel cables to guarantee max safety. Anchorage systems: * Fixed base-plate * Portable base-plate for forklift truck transfer * Portable base-plate for pallet truck transfer * Portable base-plate for manual transport * Trolley mounted base-plate for floor tracks. * Floor built-in track. Anchor flange The pneumatic manipulator Partner PS fixed overhead version allows to eliminate any floor obstructions. The flange of the Manipulator is supplied with holes for the anchoring with screws to a strong plate to the ceiling or to a shelf. All movements are free and are obtained with minimum effort by the direct action of the operator on the gripping tooling or on the load. Anchor The Manipulator is supplied with an overhead trolley to run in a tracking system. Tracking system The tracking system is composed of two opposite aluminium U sections with connecting and stiffening ribs,complete with attachment points for an overhead suspension and end buffers. The junction between the various parts is done with screws. Attachment The attachment of the tracking system to the supporting structure is carried out by means of rods and suspension brackets